Experiencing a bootloop on your Infinix Zero 5G 2022 after enabling Zygisk? You're not alone. This issue, while frustrating, can often be resolved with some troubleshooting steps. This guide aims to help you diagnose and potentially fix the bootloop problem.
Device Information:
- Device: Infinix Zero 5G 2022
- Android Version: 12
- Magisk Version Name: 29.0
- Magisk Version Code: 29000
Possible Causes:
- Incompatibility between Zygisk and your specific device or Android version.
- Incorrect installation or configuration of Zygisk.
- Corrupted system files caused by the Zygisk installation process.
Troubleshooting Steps:
- Disable Zygisk: The most straightforward solution is to temporarily disable Zygisk. Boot your device into recovery mode (usually by holding volume down and power buttons simultaneously) and perform a wipe cache partition. Then, reboot your device. If the bootloop is resolved, Zygisk might be the culprit.
- Re-install Magisk and Zygisk: Sometimes, a clean re-install can resolve issues. Download the latest stable versions of Magisk and Zygisk from trusted sources. Install Magisk as usual. Then, carefully install Zygisk following the provided instructions.
- Check for Updated Modules: Ensure that all Magisk modules you use are up-to-date. Outdated modules can sometimes conflict with Zygisk.
- Factory Reset (Last Resort): If none of the above steps work, a factory reset might be necessary. **Note:** This will wipe all data from your device, so back up important files beforehand.
Additional Tips:
- Join online communities dedicated to Magisk and Infinix devices for further assistance and shared troubleshooting experiences.
- Keep your device firmware up to date to ensure compatibility with Magisk and Zygisk.
- Proceed with caution when modifying your device's system files. Always back up your data before making any major changes.
This article is created by nurl and is licensed under the Creative Commons Attribution 4.0 International License.
All articles on this site, unless otherwise specified as reprints or sources, are either original works or translations by this site. Please ensure proper attribution before reprinting.