Troubleshooting: Samsung Galaxy Tab A8 (2021) Stuck in Black Screen After Flashing Firmware
in Post with 0 comment

Let's troubleshoot your Samsung Galaxy Tab A8 (2021) issue. You've successfully unlocked the bootloader, downloaded the same firmware, patched it with Magisk, but after flashing with Odin, your tablet gets stuck on a black screen. This can be frustrating, but there are some common solutions we can try:

**1. Check Connections:**
- Ensure your tablet is properly connected to your PC via USB cable.
- Try a different USB cable and port on your computer.

**2. Verify Power:**
- Make sure your tablet is adequately charged before attempting to boot.
- Connect the tablet to a power source while troubleshooting.

**3. Try a Fresh Odin Flash:**
- Download the latest version of Odin from a trusted source.
- Ensure you are flashing the correct firmware file for your specific Tab A8 (2021) model.
- Carefully review Odin's settings and double-check the firmware file path.
- Avoid interruptions during the flashing process.
- Proceed with the flash and observe the Odin logs for any errors.

**4. Boot into Download Mode (Force Reboot):**
- Power off your tablet completely.
- Press and hold the Volume Down button, Power button, and Bixby button simultaneously until you see the Samsung logo or a warning message.

**5. Reinstall Magisk:**
- If you suspect the Magisk patch is causing the issue, try removing it and flashing the original firmware again. Then, patch and flash Magisk again.

**6. Seek Expert Help:**
- If none of these steps resolve the black screen issue, it might be a hardware problem. Consider contacting Samsung support or an authorized service center for assistance.

**Note: Proceed with caution when flashing firmware. Incorrect flashing can lead to further issues. Remember to back up your data before attempting any modifications to your device.

The article has been posted for too long and comments have been automatically closed.