Troubleshooting Magisk Boot Errors on Google Pixel 7: 'Boot Failure' Issue
in Post with 0 comment

This guide outlines steps to troubleshoot a 'Boot Failure' error experienced on a Google Pixel 7 when attempting to install Magisk. The issue arises during the boot process, leaving the device stuck in recovery mode.

**Symptoms:**
- Device reboots into recovery mode.
- Error message: 'Boot Failure'
- No access to the primary boot environment

**Procedure:**
1. **Obtain Matching Firmware:** Download the latest firmware package compatible with your Pixel 7 model from a trusted source like Google's official website. Ensure the firmware matches your device's specific variant.
2. **Extract init_boot.img:** Extract the 'init_boot.img' file from the downloaded firmware archive. This file is crucial for the root installation process.
3. **Patch init_boot.img:** Transfer the extracted 'init_boot.img' to your Pixel 7 and use the Magisk app to patch it. This integrates Magisk functionalities into the boot image.
4. **Transfer Back to PC:** Transfer the patched 'init_boot.img' back to your computer.
5. **Fastboot Flashing:** Reboot your Pixel 7 into fastboot mode. Then, use the following fastboot commands in your command prompt or terminal window:
```bash
fastboot flash boot path/to/patched/file
fastboot flash init_boot path/to/patched/file
```
Replace 'path/to/patched/file' with the actual file path to the patched 'init_boot.img'
6. **Reboot:** Restart your Pixel 7.

**Troubleshooting:**
- If the issue persists, recheck the firmware compatibility and ensure you're patching the correct 'init_boot.img' file.
- Double-check the Magisk app installation and ensure it's compatible with your Pixel 7 and Android version.
- Try using both the stable and canary builds of Magisk to see if either resolves the issue.
- Consider seeking assistance from the Magisk community forum for further guidance.

**Note:** Attaching relevant logs (such as Mounts file) can be helpful when seeking assistance from the Magisk community.

The article has been posted for too long and comments have been automatically closed.